Looking for a Komatsu website outside of North America?
Large excavator

PC360LCi-11

  • Horsepower 192 kW @ 1 950 rpm 257 HP @ 1,950 rpm
  • Operating weight 35 627 - 36 535 kg 78,645 - 80,547 lbs.
  • Bucket capacity 0.68 - 1.96 m³ 0.89 - 2.56 yd³

Versatility and performance for any job

Get the production, flexibility and versatility you need with this powerful and highly productive 80,000+ lb intelligent excavator workhorse. The PC360LCi-11 provides performance to handle your large jobs, while being equally adept at your small and mid-size projects. From trenching to mass excavating, your operators can focus on moving material efficiently without digging too deep or damaging the target surface.

Features and benefits

Adjusts to the operator’s experience level

A fully integrated grade assist automatically traces the target surface to minimize over digging. A built-in facing angle compass ensures the machine is aligned with the target surface.

Auto stop control

To help eliminate potential damage during boom or bucket operation, the machine automatically stops when the bucket edge reaches the design surface.

Minimum distance control

iMC controls the bucket by automatically selecting the point closest to the target surface, which minimizes operator input while providing higher accuracy and grading confidence.

Critical precision for utility applications

For utility customers looking for the utmost precision, the excavator allows your operator to input structure, invert elevations of pipe runs and automatically calculates fall of pipe.

Powerful, advanced engine

Your fleet can be environmentally friendly without sacrificing power. Excavators with iMC 1.0 are equipment with a Tier 4 Final certified Komatsu SAA6D107E-3 engine, which features an integrated diesel particulate filter, hydraulically actuated Komatsu variable geometry turbocharger and selective Ccatalytic reduction system.

Stroke sensing hydraulic cylinder

Stroke sensing hydraulic cylinders provide real-time position that is immediately displayed to the operator. This is an improvement over conventional aftermarket machine guidance (indicate only) systems with tilt sensors that require time to stabilize.

Robust undercarriage

A large counterweight and robust undercarriage components help provide outstanding stability.

Specifications for PC360LCi-11

Close all Expand all
US system Metric
Engine
Model Komatsu SAA6D114E-6*
Type Water-cooled, 4-cycle, direct injection
Aspiration Komatsu Variable Geometry Turbocharger with air-to-air aftercooler and EGR
Number of cylinders 6
Bore 114 mm
Stroke 144.5 mm
Piston displacement 8.85 L
Horsepower:
SAE J1995 - Gross 202 kW
ISO 9249/SAE J1349 - Net 192 kW
Rated rpm 1 950
Governor All-speed control, electronic.
Fan drive method for radiator cooling Mechanical
*EPA Tier 4 Final emissions certified
Model Komatsu SAA6D114E-6*
Type Water-cooled, 4-cycle, direct injection
Aspiration Komatsu Variable Geometry Turbocharger with air-to-air aftercooler and EGR
Number of cylinders 6
Bore 4.49 in
Stroke 5.69 in
Piston displacement 540 in³
Horsepower:
SAE J1995 - Gross 271 HP
ISO 9249/SAE J1349 - Net 257 HP
Rated rpm 1,950
Governor All-speed control, electronic.
Fan drive method for radiator cooling Mechanical
*EPA Tier 4 Final emissions certified
Hydraulics

Type: HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valves, 6 selectable working modes

Main pump:
Pumps for Boom, arm, bucket, swing, and travel circuits
Type Variable displacement piston type
Maximum flow 535 L/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motor with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 37.3 MPa 380 kgf/cm²
Travel circuit 37.3 MPa 380 kgf/cm²
Swing circuit 27.9 MPa 285 kgf/cm²
Pilot circuit 3.2 MPa 33 kgf/cm²
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter
Boom / 2 140 x 1480 x 100 mm
Arm / 1 160 x 1825 x 110 mm
Bucket / 1 - for 3.2 m and 4.0 m Arms 140 x 1285 x 100 mm
Bucket / 1 - for 2.54 m Arm 150 x 1285 x 110 mm

Type: HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valves, 6 selectable working modes

Main pump:
Pumps for Boom, arm, bucket, swing, and travel circuits
Type Variable displacement piston type
Maximum flow 141 US gpm
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motor with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 5,400 psi
Travel circuit 5,400 psi
Swing circuit 4,050 psi
Pilot circuit 470 psi
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter
Boom / 2 5.5 x 58.3 x 3.9 in
Arm / 1 6.3 x 71.9 x 4.3 in
Bucket / 1 - for 10'5" and 13'2" Arms 5.5 x 50.6 x 3.9 in
Bucket / 1 - for 8'4" Arm 5.9 x 50.6 x 4.3 in
Drives and Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 290 kN  29 570 kgf
Gradeability 70%, 35°
Maximum travel speed: (Auto-Shift)
   High 5.5 kph
   Mid 4.2 kph
   Low 3.2 kph
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 65,191 lbs.
Gradeability 70%, 35°
Maximum travel speed: (Auto-Shift)
   High 3.4 mph
   Mid 2.8 mph
   Low 2.0 mph
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method Hydrostatic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 9.5 rpm
Swing torque 11 386 kg-m
Drive method Hydrostatic motor
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 9.5 rpm
Swing torque 82,313 ft.-lbs.
Undercarriage
Center frame X-frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Center frame X-frame
Track frame Box-section
Track type Sealed
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Coolant & Lubricant Capacity (Refilling)
Fuel tank 605 L
Coolant 37 L
Engine 35 L
Final drive, each side 9 L
Swing drive 13.7 L
Hydraulic tank 188 L
Diesel Exhaust Fluid (DEF) tank 39 L
Fuel tank 159.8 US gal
Coolant 9.7 US gal
Engine 9.2 US gal
Final drive, each side 2.4 US gal
Swing drive 3.6 US gal
Hydraulic tank 49.7 US gal
Diesel Exhaust Fluid (DEF) tank 10.3 US gal
Operating Weight (Approximate)

Operating weight includes 6 500 mm one-piece HD boom, 3 185 mm arm, SAE heaped 1.96 m3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.

Shoes 800 mm
850 mm
Operating Weight: 35 892 kg
36 200 kg
Ground Pressure 0.52 kg/cm²
0.49 kg/cm²

Operating weight includes 21 ft. 3 in one-piece HD boom, 10 ft. 5 in arm, SAE heaped 2.53 yd3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.

Shoes 31.5 in 33.5 in
Operating Weight: 79,128 lbs. 79,807 lbs.
Ground Pressure 7.33 psi 6.9 psi
  • 3 speed travel with auto shift
  • Alternator, 90 Ampere, 24V
  • AM/FM radio
  • Arm holding valve
  • Automatic engine warm-up system
  • Automatic climate control/air conditioner/heater/defroster
  • Auto idle
  • Auto idle shut down, programmable
  • Auxiliary input (3.5mm jack)
  • Batteries, large capacity (2 x 12V)
  • Battery master disconnect switch
  • Boom holding valves
  • Carrier rollers, (2 each side)
  • Converter, (2) x 12V
  • Counterweight, 6920 kg
  • Dry type air cleaner, double element
  • Electric horn
  • Engine, Komatsu SAA6D114E-6
  • Engine coolant to -25°C
  • EMMS monitoring system
  • Engine overheat prevention system
  • Extended work equipment grease interval
  • Fan guard structure
  • Fuel priming pump
  • Fuel system pre-filter 10 micron
  • Grease sealed track chain
  • High back air suspension seat, with heat
  • Hydraulic cooling fan (reversible)
  • Hydraulic track adjusters
  • KOMTRAX® Level 5.0
  • Large LCD color monitor, high resolution
  • Lock lever
  • Mirrors, (LH and RH)
  • Operator Protective Top Guard (OPG), Level 1
  • Operator identification system
  • Pattern change valve (ISO to BH control)
  • Power maximizing system
  • PPC hydraulic control system
  • Pump/engine room partition cover
  • Radiator and oil cooler dustproof net
  • Rear reflectors
  • Rearview monitoring system (1 camera)
  • Revolving frame deck guard
  • Revolving frame undercovers
  • ROPS cab (ISO12117-2)
  • Seat belt indicator
  • Seat belt, retractable, 76mm
  • Secondary engine shutoff switch
  • Service valve
  • Skylight
  • Slip resistant foot plates
  • Starter motor, 11.0kW/24V x 1
  • Suction fan
  • Thermal and fan guards
  • Track frame swivel guard
  • Track roller guards, center section
  • Track rollers, 8 (each side)
  • Track shoes, triple grouser, 850mm
  • Travel alarm
  • Two boom mode settings
  • Working lights, 2 (boom and RH front)
  • Working mode selection system
  • 3 speed travel with auto shift
  • Alternator, 90 Ampere, 24V
  • AM/FM radio
  • Arm holding valve
  • Automatic engine warm-up system
  • Automatic climate control/air conditioner/heater/defroster
  • Auto idle
  • Auto idle shut down, programmable
  • Auxiliary input (3.5mm jack)
  • Batteries, large capacity (2 x 12V)
  • Battery master disconnect switch
  • Boom holding valves
  • Carrier rollers, (2 each side)
  • Converter, (2) x 12V
  • Counterweight, 15,255 lb
  • Dry type air cleaner, double element
  • Electric horn
  • Engine, Komatsu SAA6D114E-6
  • Engine coolant to -13°F
  • EMMS monitoring system
  • Engine overheat prevention system
  • Extended work equipment grease interval
  • Fan guard structure
  • Fuel priming pump
  • Fuel system pre-filter 10 micron
  • Grease sealed track chain
  • High back air suspension seat, with heat
  • Hydraulic cooling fan (reversible)
  • Hydraulic track adjusters
  • KOMTRAX® Level 5.0
  • Large LCD color monitor, high resolution
  • Lock lever
  • Mirrors, (LH and RH)
  • Operator Protective Top Guard (OPG), Level 1
  • Operator identification system
  • Pattern change valve (ISO to BH control)
  • Power maximizing system
  • PPC hydraulic control system
  • Pump/engine room partition cover
  • Radiator and oil cooler dustproof net
  • Rear reflectors
  • Rearview monitoring system (1 camera)
  • Revolving frame deck guard
  • Revolving frame undercovers
  • ROPS cab (ISO12117-2)
  • Seat belt indicator
  • Seat belt, retractable, 3"
  • Secondary engine shutoff switch
  • Service valve
  • Skylight
  • Slip resistant foot plates
  • Starter motor, 11.0kW/24V x 1
  • Suction fan
  • Thermal and fan guards
  • Track frame swivel guard
  • Track roller guards, center section
  • Track rollers, 8 (each side)
  • Track shoes, triple grouser, 33.5"
  • Travel alarm
  • Two boom mode settings
  • Working lights, 2 (boom and RH front)
  • Working mode selection system
  • Arms
    – 3185 mm arm assembly
    – 3185 mm arm assembly with piping
    – 4020 mm arm assembly
  • Booms
    – 6500 mm HD boom assembly
    – 6500 mm HD boom assembly with piping
  • Cab guards
    – Full front guard, OPG Level 1
    – Full front guard, OPG Level 2
    – Bolt-on top guard, OPG Level 2
  • High pressure in-line hydraulic filters
  • Hydraulic control unit, 1 actuator
  • Rain visor
  • Revolving frame undercovers, heavy duty
  • Revolving frame undercovers, severe duty
  • Sun visor
  • Straight travel pedal
  • Track roller guards, full length
  • Track shoes, triple grouser, 800 mm  
  • Working lights, front, two additional cab mounted
  • Arms
    – 10'5" arm assembly
    – 10'5" arm assembly with piping
    – 13'2" arm assembly
  • Booms
    – 21'3" HD boom assembly
    – 21'3" HD boom assembly with piping
  • Cab guards
    – Full front guard, OPG Level 1
    – Full front guard, OPG Level 2
    – Bolt-on top guard, OPG Level 2
  • High pressure in-line hydraulic filters
  • Hydraulic control unit, 1 actuator
  • Rain visor
  • Revolving frame undercovers, heavy duty
  • Revolving frame undercovers, severe duty
  • Sun visor
  • Straight travel pedal
  • Track roller guards, full length
  • Track shoes, triple grouser, 31.5"
  • Working lights, front, two additional cab mounted
Support you can count on

Technology that works as hard as you do

Dozer_D71PXi_Cartersville GA_Qube_201104_3K1A2001.psd
Komatsu’s Intelligent Machine Control (IMC) is a suite of products, services and digital solutions developed with input from leading construction companies.
Dozer_D71PXi_Cartersville GA_Qube_201104_3K1A2087.psd
Improve accuracy on your job site with Smart Construction — a suite of tech solutions that helps you optimize your operations.
Proactive dozing control
The fully integrated dozing control system allows you to perform auto-stripping, auto-spreading and high production dozing, as well as finish grading.

Find what works for you