Looking for a Komatsu website outside of North America?
Tracked harvester

XT430-5

  • Horsepower 247 kW @ 1 900 rpm 331 HP @ 1,600 rpm
  • Tractive effort 29 450 kgf 64,926 lbf.
  • Swing torque 87 375 Nm 64,445 lbs.-ft.

Designed to optimize productivity

You need high productivity and minimal downtime in even the tightest harvesting areas. That’s what the XT430-5 tracked harvester is designed to do, with its small footprint, smart design and enhanced servicing features. Operators benefit from a state-of-the-art cab and controls.

  • Significantly greater lift capacity*
  • 10% more horsepower/16% more torque*
  • 5% lower fuel consumption*
  • Excellent uptime and serviceability 

     

    *Compared to XT-3 models. All comparisons and claims of improved performance made herein are made with respect to the prior Komatsu model unless otherwise specifically stated. ©2022 Komatsu America Corp.

Features and benefits

Tracked Harvester_XT430 5_Canada_SR_220412_03.jpg

Helps reduce servicing downtime

The faster you can service your machines, the faster they can get back to work. Komatsu’s engine gull-wing and wide swing-out doors offer quick and easy access to all engine service points and all key components.
Tracked Harvester_XT430 5_Canada_SR_220413_(71).jpg

Equipped to multi-task

Closed-loop system allows operators to simultaneously travel, cut, delimb, harvest and swing timber — all in one powerful and agile machine. Engineered with hydraulic lines for each function, driving performance while helping to prevent machine damage.
Tracked Harvester_XT430 5_Canada_SR_220413_(46).jpg

Maneuvers in dense terrain

Work better through dense forests and clear-cutting environments with a short-tail swing design. Cut close to the undercarriage and tracks with set-back boom engineering. Powerful swing torque for demanding applications.
Tracked Harvester_XT430 5_Canada_SR_220413_(68).jpg

Better lift capacity

Handling trees with the arm fully extended is even easier with a design that significantly increases lift capacity compared to previous models. Excellent balance between boom lift and arm holding capacity. Can be equipped with a wide selection of harvesting saw heads.
Tracked Harvester_XT430 5_Canada_SR_220413_(73).jpg

Designed for operator comfort

Help reduce fatigue and support productivity by giving your operators a roomy, comfortable work environment. Features include superior visibility - especially to the tracks - and provides powerful heating, cooling and defrosting systems.
Tracked Harvester_XT430 5_Canada_SR_220413_(74).jpg

Customizable for each operator

When working shifts switch, the controls can be swapped by adjusting to each operator’s preference (up to three setting) to help maximize productivity. Set preferences for joystick, boom, stick, tool tilt, swing, cab leveling and more.
Tracked Harvester_XT430 5_Canada_SR_220412_13.jpg

Adapts to long or short reach

Adapt your equipment to the job with two different working ranges. Use the short reach and larger-scaled head when the job demands it. Switch to a longer reach and more compact designed head when working in restricted spaces.
Track Feller Buncher_XT component_200729_DSC_5821.psd

Powerful and fuel-efficient

Get more done with the powerful and efficient Cummins QSL9 engine that delivers more horsepower and torque while using less fuel consumption compared to XT-3 models. EPA Tier 4 final emissions certified.
Tracked Harvester_XT430 5_Canada_SR_220413_(71).jpg

Stands up to debris

Forestry conditions pose debris hazards that can slow operations and reduce productivity. Komatsu’s harvesters help minimize that risk with various design specific forestry guarding.
Tracked Harvester_XT430 5_Canada_SR_220413_38.jpg

Promoting stability on slopes

Operators can work with confidence even on sloped terrains. A heavy-duty, four-way leveling system promotes front/rear/side leveling for exceptional stability. The fuel tank placement lowers the center gravity to offer even more enhanced stability.
Tracked Harvester_XT430 5_Canada_SR_220413_(47).jpg

Designed to meet your job demands

Forestry harvesting demands vary widely, so Komatsu tracked harvesters are designed to adapt. You can factory-equip your machine with a broad selection of harvesting saw heads — to match the type of performance your job sites require.
Tracked Harvester_XT430 5_Canada_SR_220413_(75).jpg

Promote lower maintenance costs

Save on maintenance costs with an innovative hydraulic tank system design that requires 55% less hydraulic oil compared to the XT-3 models. Plus, pumps are equipped with hydro-nucleation to help prevent pump cavitation and are 17% larger* to help extend component life by operating 500 rpms slower. *17% larger than the XT-3.

Specifications for XT430-5

Close all Expand all
US system Metric
Dimensions
Width With 600/45x24,5 tires: 2 620 mm             
Length, total 7 240 mm
Length, front axle to middle joint 1 850 mm
Length, middle joint to rear axle 1 700 mm
Transport height 3 790 mm (with tire compression)
Ground clearance 635 mm             

Note: Stated dimensions are nominal and may vary slightly depending on production tolerances and choice of equipment.

Width With 600/45x24,5 tires: 8 ft. 7 in
Length, total 23 ft. 9 in
Length, front axle to middle joint 6 ft. 1 in
Length, middle joint to rear axle 5 ft. 7 in
Transport height 12 ft. 5 in (with tire compression)
Ground clearance 2 ft. 1 in

Note: Stated dimensions are nominal and may vary slightly depending on production tolerances and choice of equipment.

Weight
Approximate weight From 17 600 kg
Approximate weight From 38,801 lbs.
Engine
Type, Europe and North America AGCO POWER. 6-cylinder diesel engine with turbo and intercooler. Tier 4F.
Stroke volume 6.6 l 
Power 170 kW DIN at 1 900 rpm
Torque 950 Nm at 1 500 rpm
Fuel tank 370 l 
Type, Europe and North America AGCO POWER. 6-cylinder diesel engine with turbo and intercooler. Tier 4F.
Stroke volume 1.74 gal
Power 170 kW DIN at 1,900 rpm
Torque 950 Nm at 1,500 rpm
Fuel tank 97.74 gal
Boom
Model and reach 200H : 10 m or 11 m
Gross lifting torque 198 kNm
Gross slewing torque 43 kNm
Model and reach 200H : 32 ft. 10 in or 36 ft. 1 in
Gross lifting torque 14,604 lbf.-ft.
Gross slewing torque 31,715 lbf.-ft.
Heads
Available heads S82, S92, C93
Available heads S82, S92, C93
Hydraulic system
Flow 400 L/min at 1 600 rpm
System pressure 280 bar
Flow 106 gpm at 1,600 rpm
System pressure 280 bar
Electrical system
Voltage 24 V
Battery capacity 2 x 180 Ah
Generator 2 x 100 A
Voltage 24 V
Battery capacity 2 x 180 Ah
Generator 2 x 100 A
Transmission
Driving speed 0 - approx. 24 kph
Tractive force 164 kN
Driving speed 0 - approx. 14.9 mph
Tractive force 164 kN
Notes

The specifications describe possible equipment, not which equipment is standard or optional. Standard and optional equipment varies between countries. Your sales representative has an up-to-date list of what is included. Weights are based on the equipment specified in the basic specification. Specifications and designs are subject to alteration without prior notice.

The specifications describe possible equipment, not which equipment is standard or optional. Standard and optional equipment varies between countries. Your sales representative has an up-to-date list of what is included. Weights are based on the equipment specified in the basic specification. Specifications and designs are subject to alteration without prior notice.

Support you can count on

Find what works for you