Keep your 240-290 trucks productive with the intelligent, robust and versatile PC7000. Its 38m³ shovel is sized to cycle big loads fast, while its advanced intelligent data solutions and performance monitoring can help you optimize the transfer of every load.
Model | 2 x Komatsu SSDA16V159E-2 Tier 2 |
Type | 4-cycle, water-cooled, direct injection |
Aspiration | Turbocharged and aftercooled |
Number of cylinders | 16 |
Rated power @ 1 800 rpm (SAE 1995/J1349) |
2 x 1 250 kW |
Governor | All-speed, electronic |
The integrated engine oil and filter system combining the oil stabilising systems, Reserve and Centinel, with Eliminator oil filter extends the oil change interval up to 4.000 hours based on oil analysis. The high capacity Mesabi engine radiators are cooled by a hydraulically driven fan for superior cooling efficiency.
Model | 2 x Komatsu SSDA16V159E-2 Tier 2 |
Type | 4-cycle, water-cooled, direct injection |
Aspiration | Turbocharged and aftercooled |
Number of cylinders | 16 |
Rated power @ 1,800 rpm (SAE 1995/J1349) |
2 x 1,675 HP |
Governor | All-speed, electronic |
The integrated engine oil and filter system combining the oil stabilising systems, Reserve and Centinel, with Eliminator oil filter extends the oil change interval up to 4.000 hours based on oil analysis. The high capacity Mesabi engine radiators are cooled by a hydraulically driven fan for superior cooling efficiency.
System | 24 V |
Batteries (series/parallel) | 8 x 12 V |
Alternator | 2 x 140 A |
Standard working lights | 16 LED lights |
Standard service lights | throughout platform incl. emergency egresses and stairways |
System | 24 V |
Batteries (series/parallel) | 8 x 12 V |
Alternator | 2 x 140 A |
Standard working lights | 16 LED lights |
Standard service lights | throughout platform incl. emergency egresses and stairways |
Undercarriage consists of one centre carbody and two track frames, each side attached by high torque bolts
Center frame | H-type |
Track frame | Steel box-section |
Undercarriage consists of one centre carbody and two track frames, each side attached by high torque bolts
Center frame | H-type |
Track frame | Steel box-section |
Track adjustment | Automatic hydraulic type |
Number of track shoes | 49 each side |
Number of top rollers | 3 each side |
Number of bottom rollers | 7 each side |
Track adjustment | Automatic hydraulic type |
Number of track shoes | 49 each side |
Number of top rollers | 3 each side |
Number of bottom rollers | 7 each side |
Travel control | 2 foot pedals |
Gradeability | Up to 50% |
Travel speed (maximum) | 2.5 kph |
Service brake | Hydraulic brake |
Parking brake | Wet, multiple-disc |
Travel control | 2 foot pedals |
Gradeability | Up to 50% |
Travel speed (maximum) | 1.55 mph |
Service brake | Hydraulic brake |
Parking brake | Wet, multiple-disc |
Hydraulic motors and drives | 3 |
Swing brake, service | Hydraulic brake |
Swing brake, parking | Wet, multiple-disc |
Swing ring teeth | External |
Swing speed (maximum) | 3.1 rpm |
Hydraulic motors and drives | 3 |
Swing brake, service | Hydraulic brake |
Swing brake, parking | Wet, multiple-disc |
Swing ring teeth | External |
Swing speed (maximum) | 3.1 rpm |
Type | 2 x Squirrel cage induction motor |
Power output | 2 x 1 200 kW |
Voltage | 6 000 - 7 200 V* |
Amperage (approximate) | 2 x 128 A - 2 x 107 A |
Start-up | Soft start each motor in succession |
Frequency standard | 60 Hz @ 1 800 rpm |
Frequency option | 50 Hz @ 1 500 rpm |
*Other voltages available on request |
Type | 2 x Squirrel cage induction motor |
Power output | 2 x 1,200 kW |
Voltage | 6,000 - 7,200 V* |
Amperage (approximate) | 2 x 128 A - 2 x 107 A |
Start-up | Soft start each motor in succession |
Frequency standard | 60 Hz @ 1,800 rpm |
Frequency option | 50 Hz @ 1,500 rpm |
*Other voltages available on request |
System | 24 V |
Batteries (series/parallel) | 4 x 12 V |
Battery charger | 3 x 100 A |
Standard working lights | 16 LED lights |
Standard service lights | throughout platform incl. emergency egresses and stairways |
System | 24 V |
Batteries (series/parallel) | 4 x 12 V |
Battery charger | 3 x 100 A |
Standard working lights | 16 LED lights |
Standard service lights | throughout platform incl. emergency egresses and stairways |
The power train consists of two main drives. Each of the two gearboxes drives three identical pumps which draw hydraulic oil from an unpressurised hydraulic tank. Open circuit hydraulics provide maximum cooling and filtering efficiency.
Rated flow (total output) | 6 210 L/min |
Relief valve setting | 310 bar |
Swing flow rate | 1 035 L/min |
High pressure in line filters (one per pump located at the valve blocks) |
200 µm |
Full flow return line filters at head of hydraulic tank |
10 µm |
Case drain/by-pass return line filters | 3 microns |
The four-circuit system features a load-limiting governor with oil delivery summation to the working circuits and incorporates pressure cut-off control. Hydropilot prioritises hydraulic flow giving smooth hydraulic response, simple hydraulic system layout, and a reduced number of components. The hydraulic system includes large swing-out vertical air-to- oil hydraulic coolers with temperature-regulated hydraulically driven fans.
The power train consists of two main drives. Each of the two gearboxes drives three identical pumps which draw hydraulic oil from an unpressurised hydraulic tank. Open circuit hydraulics provide maximum cooling and filtering efficiency.
Rated flow (total output) | 1,640 gpm |
Relief valve setting | 4,495 psi |
Swing flow rate | 273 gpm |
High pressure in line filters (one per pump located at the valve blocks) |
200 µm |
Full flow return line filters at head of hydraulic tank |
10 µm |
Case drain/by-pass return line filters | 3 microns |
The four-circuit system features a load-limiting governor with oil delivery summation to the working circuits and incorporates pressure cut-off control. Hydropilot prioritises hydraulic flow giving smooth hydraulic response, simple hydraulic system layout, and a reduced number of components. The hydraulic system includes large swing-out vertical air-to- oil hydraulic coolers with temperature-regulated hydraulically driven fans.
Three hydraulically powered Lincoln single line automatic lubrication systems are provided as standard, complete with time and volume variable controls. The two central lubrication circuits and open gear grease circuit are supplied by identical pump assemblies from refillable containers which have a capacity of 1x 600 and 1x 300 L (total 238 gal). Replenishment of the containers is through the Wiggins connections on the service arm.
Three hydraulically powered Lincoln single line automatic lubrication systems are provided as standard, complete with time and volume variable controls. The two central lubrication circuits and open gear grease circuit are supplied by identical pump assemblies from refillable containers which have a capacity of 1x 600 and 1x 300 L (total 238 gal). Replenishment of the containers is through the Wiggins connections on the service arm.
Hydraulic oil tank | 4 750 L |
Hydraulic system | 9 500 L |
Fuel | 13 033 L |
Engine coolant | 2 x 440 L |
Engine oil | .2 x 236 L |
Reserve engine oil make up tank | 2 x 665 L |
Hydraulic oil tank | 1,255 US gal |
Hydraulic system | 2,510 US gal |
Fuel | 3,443 US gal |
Engine coolant | 2 x 116 US gal |
Engine oil | 2 x 62 US gal |
Reserve engine oil make up tank | 2 x 176 US gal |
The large and comfortable cab is mounted on 18 viscous damping pads and sound insulated. The cab has automatic climate control and is pressurised. The operator’s seat is air suspended, electrically heated and has a lap seat belt and offers multiple adjustments. The trainer seat is also equipped with a seat belt. Low-effort joystick controls are electrohydraulic with foot controls for front shovel clam, crawler and swing brake. Full instrumentation, Komtrax Plus and an AM/FM radio with MP3 ready CD player with AUX in is fitted. The windshield wash wiper has two speeds and intermittent operation. Amenities include a refrigerator and storage cabinets. Powered and heated mirrors are adjusted from inside the cab. External metal sun blinds on the cab side window and internal roller blinds on all windows are standard. The left hand window is an emergency exit. All windows are tinted parsol green. The front window is a 19 mm thick impact resistant window. A walkway is mounted in front of cabin.
The large and comfortable cab is mounted on 18 viscous damping pads and sound insulated. The cab has automatic climate control and is pressurised. The operator’s seat is air suspended, electrically heated and has a lap seat belt and offers multiple adjustments. The trainer seat is also equipped with a seat belt. Low-effort joystick controls are electrohydraulic with foot controls for front shovel clam, crawler and swing brake. Full instrumentation, Komtrax Plus and an AM/FM radio with MP3 ready CD player with AUX in is fitted. The windshield wash wiper has two speeds and intermittent operation. Amenities include a refrigerator and storage cabinets. Powered and heated mirrors are adjusted from inside the cab. External metal sun blinds on the cab side window and internal roller blinds on all windows are standard. The left hand window is an emergency exit. All windows are tinted parsol green. The front window is a 19 mm thick impact resistant window. A walkway is mounted in front of cabin.
Komtrax Plus is designed for Komatsu mining equipment to provide real time information about the operating status of the machine via a coloured display. The integrated digital storage provides a full event history and trend data, which can be downloaded by laptop. Optionally available are W-LAN or Orbcomm satellite transmission (check for availability in your territory).
Komtrax Plus is designed for Komatsu mining equipment to provide real time information about the operating status of the machine via a coloured display. The integrated digital storage provides a full event history and trend data, which can be downloaded by laptop. Optionally available are W-LAN or Orbcomm satellite transmission (check for availability in your territory).
Mining track shoes
Track shoes penetrate the ground giving the machine traction to move — proper shoe selection is important for optimum machine performance and long undercarriage life.