Looking for a Komatsu website outside of North America?
Mid-size excavator

PC290LCi-11

  • Horsepower 147 kW @ 2 000 rpm 196 HP @ 2,000 rpm
  • Operating weight 32 070 - 32 700 kg 70,702 - 72,091 lbs.
  • Bucket capacity 0.58 - 1.63 m³ 0.76 - 2.13 yd³

Leave nothing behind

Expect first-to-last-pass accuracy in a stable and productive machine across multiple applications, without the transportation-permit headaches of bigger machines. The 5th intelligent machine control excavator in the Komatsu family, the PC290LCi-11 leverages proven technology that minimizes over-excavation and leaves nothing behind but a clean and accurate graded surface.

  • Large high-strength steel castings on the boom, arm and bucket link.
  • Closed-center load-sensing hydraulics for precise, fine control.
  • Large displacement high-efficiency pumps provide optimal attachment flow.
  • Large, spacious, quiet cab featuring standard air suspension seat.

Features and benefits

Excavator_PC210LCi 11_literature link_Slope_ko_v1.psd

Adjusts to the operator’s experience level

A fully integrated grade assist automatically traces the target surface to minimize over digging. A built-in facing angle compass ensures the machine is aligned with the target surface.
Excavator_iMC_FBautostop_SS_3.psd

Auto stop control

To help eliminate potential damage during boom or bucket operation, the machine automatically stops when the bucket edge reaches the design surface.
Excavators_iMC_distance control_20151215_PC490LCi_012.psd

Minimum distance control

iMC controls the bucket by automatically selecting the point closest to the target surface, which minimizes operator input while providing higher accuracy and grading confidence.
Excavator_PC210LC 11_literature link_IMG_0046.psd

Critical precision for utility applications

For utility customers looking for the utmost precision, the excavator allows your operator to input structure, invert elevations of pipe runs and automatically calculates fall of pipe.
Excavator_PC210LC_literature link_SAA6D107E 3_engine.psd

Powerful, advanced engine

Your fleet can be environmentally friendly without sacrificing power. Excavators with iMC 1.0 are equipment with a Tier 4 Final certified Komatsu SAA6D107E-3 engine, which features an integrated diesel particulate filter, hydraulically actuated Komatsu variable geometry turbocharger and selective Ccatalytic reduction system.
Excavator_PC210LCi_literature link_20130805_009.psd

Stroke sensing hydraulic cylinder

Stroke sensing hydraulic cylinders provide real-time position that is immediately displayed to the operator. This is an improvement over conventional aftermarket machine guidance (indicate only) systems with tilt sensors that require time to stabilize.
PC490LCi_11_Page 3 Bottom.jpg

Robust undercarriage

A large counterweight and robust undercarriage components help provide outstanding stability.

Specifications for PC290LCi-11

Close all Expand all
US system Metric
Engine
Model Komatsu SAA6D107E-3*
Type Water-cooled, 4-cycle, direct injection
Aspiration Komatsu variable geometry turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 107 mm
Stroke 124 mm
Piston displacement 6.69 L
Horsepower:
   SAE J1995 : Gross 159 kW
   ISO 9249/SAE J1349 : Net 147 kW
   Rated rpm 2 050 rpm
Fan drive type Mechanical
Governor All-speed control, electronic.
*EPA Tier 4 Final emissions certified
Model Komatsu SAA6D107E-3*
Type Water-cooled, 4-cycle, direct injection
Aspiration Komatsu variable geometry turbocharged, aftercooled, cooled EGR
Number of cylinders 6
Bore 4.21 in
Stroke 4.88 in
Piston displacement 408 in³
Horsepower:
   SAE J1995 : Gross 213 HP
   ISO 9249/SAE J1349 : Net 196 HP
   Rated rpm 2,050 rpm
Fan drive type Mechanical
Governor All-speed control, electronic.
*EPA Tier 4 Final emissions certified
Hydraulics

Type: HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves

Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 479 L/min
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motor with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 380 kgf/cm²/ 37.3 MPa
Travel circuit 380 kgf/cm² / 37.3 MPa
Swing circuit 295 kgf/cm²/ 28.9 MPa
Pilot circuit 33 kgf/cm² / 3.2 MPa
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter
Boom / 2 140 x 1300 x 100 mm
Arm / 1 150 x 1635 x 110 mm
Bucket / 1 140 x 1009 x 100 mm

Type: HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves

Number of selectable working modes 6
Main pump:
Type Variable displacement piston type
Pumps for Boom, arm, bucket, swing, and travel circuits
Maximum flow 126.5 US gpm
Supply for control circuit Self-reducing valve
Hydraulic motors:
Travel 2 x axial piston motor with parking brake
Swing 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits 5,400 psi
Travel circuit 5,400 psi
Swing circuit 4,190 psi
Pilot circuit 470 psi
Hydraulic cylinders:
Number of cylinders Bore x Stroke x Rod Diameter
Boom / 2 5.5 x 51.2 x 3.9 in
Arm / 1 5.9 x 64.3 x 4.3 in
Bucket / 1 5.5 x 39.7 x 3.9 in
Drives and Brakes
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 249 kN / 25 400 kg
Gradeability 70%, 35°
Maximum travel speed: (Auto-Shift)
   High 5.5 kph
   Mid 4.1 kph
   Low 3.0 kph
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Steering control Two levers with pedals
Drive method Hydrostatic
Maximum drawbar pull 56,000 lbs.
Gradeability 70%, 35°
Maximum travel speed: (Auto-Shift)
   High 3.4 mph
   Mid 2.5 mph
   Low 1.9 mph
Service brake Hydraulic lock
Parking brake Mechanical disc brake
Swing System
Drive method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 10.5 rpm
Swing torque 8 889 kg-m
Drive method Hydrostatic
Swing reduction Planetary gear
Swing circle lubrication Grease-bathed
Service brake Hydraulic lock
Holding brake/Swing lock Mechanical disc brake
Swing speed 10.5 rpm
Swing torque 64,292 ft.-lbs.
Undercarriage
Center frame X-frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Center frame X-frame
Track frame Box-section
Seal of track Sealed track
Track adjuster Hydraulic
Number of shoes 48 each side
Number of carrier rollers 2 each side
Number of track rollers 8 each side
Sound Performance
Exterior – ISO 6395 104 dB(A)
Operator – ISO 6396 70 dB(A)
Exterior – ISO 6395 104 dB(A)
Operator – ISO 6396 70 dB(A)
Coolant & Lubricant Capacity (Refilling)
Fuel tank 400 L
Coolant 36 L
Engine 23.1 L
Final drive, each side 8.0 L
Swing drive 7.2 L
Hydraulic tank 132 L
Hydraulic system 253 L
DEF tank 23.1 L
Fuel tank 105.7 US gal
Coolant 9.5 US gal
Engine 6.1 US gal
Final drive, each side 2.1 US gal
Swing drive 1.9 US gal
Hydraulic tank 34.9 US gal
Hydraulic system 66.8 US gal
DEF tank 6.1 US gal
Operating Weight (Approximate)

Operating weight includes 6 150 mm one-piece boom, 3 200 mm arm, SAE heaped 1.63 m3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment..

Triple-Grouser Shoes Operating Weight: Ground Pressure
700 mm
32 070 kg
0.53 kg/cm2
800 mm
32 450 kg
0.46 kg/cm2
850 mm
32 700 kg
0.44 kg/cm2

Operating weight includes 20 ft. 2 in one-piece boom, 10 ft. 6 in arm, SAE heaped 2.13 yd3 bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment..

Triple-Grouser Shoes Operating Weight: Ground Pressure
28 in 70,702 lbs. 7.48 psi
31.5 in 71,540 lbs. 6.63 psi
33.5 in
72,091 lbs.
6.28 psi

Cab

  • ROPS cab (ISO12117-2)
  • High back air suspension seat, with heat
  • Operator Protective Guard (OPG) Level 1 top guard
  • Large LCD high resolution color monitor
  • Automatic climate control
  • Retractable seat belt (76mm width) with indicator
  • Two 12V accessory outlets
  • Rearview mirrors, right hand and left hand side
  • Rearview monitoring system (1 camera)
  • Travel alarm
  • Proportional joystick control levers
  • Operator identification system
  • Hydraulic lock lever
  • Skylight

Engine

  • Komatsu SAA6D107E-3 Tier 4 Final
  • Dry type air cleaner, double element
  • Fuel pre-filter with water separator
  • Fuel high efficiency filter
  • Automatic engine warm up system
  • Programmable auto-idle shut down
  • Overheat prevention system
  • Turbocharger protection system

Hydraulic controls

  • Pattern change control valve (ISO to BH control)
  • Working mode selection system (6 Modes)
  • Dual pump, Closed Center Load Sensing System (CLSS)
  • Auto-deceleration system
  • Power max system
  • Boom and arm holding valves
  • Arm quick return valve

Technology

  • Komtrax level 5.0
  • Intelligent Machine Control
  • 264 mm (10.4") IMC color monitor with USB
  • Multi-band UHF/915SS radio
  • Auto grade assist
  • Auto stop control
  • Minimum distance control
  • Bucket angle hold control
  • Provision for auto tilt control*
  • In field design - 2D simple surface

Electrical system

  • Batteries, large capacity (2 x 12Volt)
  • Battery master disconnect switch with lockout tagout
  • Alternator (90Amp, 24Volt)
  • Starter motor (5.5 kW)
  • Secondary engine shut off switch
  • Working lights (1 front RH side / 1 boom LH side)

Booms and arms

  • 6150 mm (20'2") boom assembly
  • 3200 mm (10'6") arm assembly
  • Boom foot, boom nose, & arm end steel castings

Undercarriage and work equipment

  • 800 mm (31.5") triple grouser track shoes
  • 8 track / 2 carrier rollers (each side)
  • Hydraulic track adjusters (each side)
  • Track guiding guards, center section (each side)
  • Counterweight, 5200 kg (11,464 lbs.)
  • Object handling H-link
  • Tie off points (ISO 14567) - Work eq. and upper structure

Guards and covers

  • Revolving frame deck guards
  • Revolving frame undercovers - standard
  • Track frame swivel guard
  • Pump / engine room partition
  • Turbocharger exhaust manifold cover
  • Dust net for radiator and hydraulic oil cooler
  • Slip resistant foot plates
  • Tool free access to engine and aftertreatment
  • Left and right side hand rails

Drive and brake system

  • Three speed travel with auto shift
  • Double reduction type final drive
  • Triple labyrinth final drive seals

*IMU for auto-tilt control and one way/two way flow hyd control unit required for operation
**With revolving frame reinforcements, Only available with super long fronts
For a complete list of available attachments, please contact your local Komatsu distributor.

Cab

  • ROPS cab (ISO12117-2)
  • High back air suspension seat, with heat
  • Operator Protective Guard (OPG) Level 1 top guard
  • Large LCD high resolution color monitor
  • Automatic climate control
  • Retractable seat belt (76mm width) with indicator
  • Two 12V accessory outlets
  • Rearview mirrors, right hand and left hand side
  • Rearview monitoring system (1 camera)
  • Travel alarm
  • Proportional joystick control levers
  • Operator identification system
  • Hydraulic lock lever
  • Skylight

Engine

  • Komatsu SAA6D107E-3 Tier 4 Final
  • Dry type air cleaner, double element
  • Fuel pre-filter with water separator
  • Fuel high efficiency filter
  • Automatic engine warm up system
  • Programmable auto-idle shut down
  • Overheat prevention system
  • Turbocharger protection system

Hydraulic controls

  • Pattern change control valve (ISO to BH control)
  • Working mode selection system (6 Modes)
  • Dual pump, Closed Center Load Sensing System (CLSS)
  • Auto-deceleration system
  • Power max system
  • Boom and arm holding valves
  • Arm quick return valve

Technology

  • Komtrax level 5.0
  • Intelligent Machine Control
  • 264 mm (10.4") IMC color monitor with USB
  • Multi-band UHF/915SS radio
  • Auto grade assist
  • Auto stop control
  • Minimum distance control
  • Bucket angle hold control
  • Provision for auto tilt control*
  • In field design - 2D simple surface

Electrical system

  • Batteries, large capacity (2 x 12Volt)
  • Battery master disconnect switch with lockout tagout
  • Alternator (90Amp, 24Volt)
  • Starter motor (5.5 kW)
  • Secondary engine shut off switch
  • Working lights (1 front RH side / 1 boom LH side)

Booms and arms

  • 6150 mm (20'2") boom assembly
  • 3200 mm (10'6") arm assembly
  • Boom foot, boom nose, & arm end steel castings

Undercarriage and work equipment

  • 800 mm (31.5") triple grouser track shoes
  • 8 track / 2 carrier rollers (each side)
  • Hydraulic track adjusters (each side)
  • Track guiding guards, center section (each side)
  • Counterweight, 5200 kg (11,464 lbs.)
  • Object handling H-link
  • Tie off points (ISO 14567) - Work eq. and upper structure

Guards and covers

  • Revolving frame deck guards
  • Revolving frame undercovers - standard
  • Track frame swivel guard
  • Pump / engine room partition
  • Turbocharger exhaust manifold cover
  • Dust net for radiator and hydraulic oil cooler
  • Slip resistant foot plates
  • Tool free access to engine and aftertreatment
  • Left and right side hand rails

Drive and brake system

  • Three speed travel with auto shift
  • Double reduction type final drive
  • Triple labyrinth final drive seals

*IMU for auto-tilt control and one way/two way flow hyd control unit required for operation
**With revolving frame reinforcements, Only available with super long fronts
For a complete list of available attachments, please contact your local Komatsu distributor.

Cab

  • Sunvisor
  • Rainvisor
  • Working lights, two additional cab mounted
  • Straight travel pedal 

Hydraulic controls

  • One way/two way flow hyd control unit
     Variable pressure and flow, return filter, & accumulator

Technology

  • Komvision (4 camera system)
  • IMU for auto tilt control 

Booms and arms

  • 6150mm (20'2") boom assembly with +1 attach piping
  • 3200mm (10'6") arm assembly with +1 attach piping
  • 3500mm (11'6") arm assembly
  • 3500mm (11'6") arm assembly with +1 attach piping

Undercarriage and work equipment

  • 850mm (33.5") triple grouser track shoes
  • 700mm (28") triple grouser track shoes
  • Track roller guards, full length (each side)

Guards and covers

  • Cab full front guard, OPG Level 1
  • Cab full front guard, OPG Level 2
  • Cab top guard, OPG Level 2
  • Revolving frame undercovers - heavy duty

*IMU for auto-tilt control and one way/two way flow hyd control unit required for operation
**With revolving frame reinforcements, Only available with super long fronts
For a complete list of available attachments, please contact your local Komatsu distributor.

Cab

  • Sunvisor
  • Rainvisor
  • Working lights, two additional cab mounted
  • Straight travel pedal 

Hydraulic controls

  • One way/two way flow hyd control unit
     Variable pressure and flow, return filter, & accumulator

Technology

  • Komvision (4 camera system)
  • IMU for auto tilt control 

Booms and arms

  • 6150mm (20'2") boom assembly with +1 attach piping
  • 3200mm (10'6") arm assembly with +1 attach piping
  • 3500mm (11'6") arm assembly
  • 3500mm (11'6") arm assembly with +1 attach piping

Undercarriage and work equipment

  • 850mm (33.5") triple grouser track shoes
  • 700mm (28") triple grouser track shoes
  • Track roller guards, full length (each side)

Guards and covers

  • Cab full front guard, OPG Level 1
  • Cab full front guard, OPG Level 2
  • Cab top guard, OPG Level 2
  • Revolving frame undercovers - heavy duty

*IMU for auto-tilt control and one way/two way flow hyd control unit required for operation
**With revolving frame reinforcements, Only available with super long fronts
For a complete list of available attachments, please contact your local Komatsu distributor.

Support you can count on

Technology that works as hard as you do

Productivity is the key to success on your job site, and the faster your crew can reach a state of maximum productivity, the better. Now you have a powerful tool to help make that happen with Komatsu’s intelligent Machine Control (iMC). Incorporating a host of advanced, proprietary machine technology, iMC gives you the opportunity to take advantage of sophisticated, productivity-enhancing automation and cutting-edge job site design.
Proactive dozing control
The fully integrated dozing control system allows you to perform auto-stripping, auto-spreading and high production dozing, as well as finish grading.
Intelligent Machine Control
The first contractor to use Komatsu's revolutionary intelligent Machine Control is more efficient, productive than ever.
Dozer_D71PXi_Cartersville GA_Qube_201104_3K1A2087.psd
Improve accuracy on your job site with Smart Construction — a suite of tech solutions that helps you optimize your operations.

Find what works for you