The PC2000-11 can load more trucks per shift. Increased engine power, a more efficient hydraulic system and new engine-pump control logic provide faster cycle times and improved multifunction performance.*
High production fuels an eight percent decrease in production costs ($/ton) compared to previous models. The new “Power Plus” operating mode delivers nine percent more engine horsepower. New engine-pump control logic and a more efficient hydraulic system.
Four working modes
Tailor machine performance to your application requirements with four selectable working modes — production increased up to 12% with Power Plus mode over previous models.
Enhanced accessibility
The 45-degree, hydraulically actuated boarding ladder for operators offer better accessibility and stability when boarding. Platforms and handrails make scheduled maintenance easier.
Operator comfort
Heated air suspension seat and suspension-mounted controls deliver operator comfort. Noise suppression provides low, cabin noise levels of 64.1 dbA. New, large-capacity air conditioning system. High resolution 7-inch monitor with rearview camera. Trainer seat standard.
Exceptional visibility
Provide your operator with a 360-degree view of the surrounding work area on a dedicated 10.4-inch LCD monitor. Standard KomVision seven-camera system can improve situational awareness, which promotes Zero Harm.
Designed for easy access maintenance
To help you minimize downtime and boost production, major components are located within the power modular, which can be quickly removed and replaced or rebuilt. Ground-level service, centralized for fuel, oil, greasing and coolant hydraulically raises and lowers at the rear of machine.
Durability and reliability
Designed to withstand tough operations, revolving frame, center frame and crawler frame structures are strengthened and redesigned boom and arm are highly resistant to bending and torsional loads.
Work equipment and hydraulics
New EPC valves optimize main valve spool control for increased speed, especially during compound movement. New, stronger boom design for increased durability and productivity. Heavy lift mode — 10 percent more boom lifting force.
Actionable insights
Track your machine and productivity with Komtrax Plus, which enables expanded fleet monitoring via satellite and wireless LAN. Analyze machine information on a near-real-time basis remotely via computer or smartphone.
Operating weight features (ft):Operating weight, including 28 ft. 7 in boom, 12 ft. 10 in arm, SAE J 296 heaped 15.7 yd3 general purpose backhoe bucket lubricant, coolant, full fuel tank, and the standard equipment.
Operating weight features (mm):Operating weight, including 8 700 mm boom, 3 900 mm arm, SAE J 296 heaped 12.0 m3 general purpose backhoe bucket lubricant, coolant, full fuel tank, and the standard equipment.
Triple grouser shoes
Operating weight with triple grouser 40 in (psi):22.8
Operating weight with triple grouser 1 010 mm (kg/cm^2):1.6
Operating weight with triple grouser 1 010 mm (kPa):157.2
Operating weight with triple trouser 1 010 mm (kg):206 050
Hydraulic cycle time (rated load in bucket)
Operating weight with triple grouser 40 in (lbs):454,134
Double grouser shoes
Operating weight with double grouser 32 in (lbs):445,054
Operating weight with double grouser 810 mm (kg):201 930
Operating weight with double grouser 810 mm (kg/cm^2):1.96
Operating weight with double grouser 810 mm (kPa):192.1
Hydraulic cylinders
Operating weight with double grouser 32 in (psi):27.9
Engine Model:Komatsu SAA12V140E-7*
Cooling Type:Water-cooled, 4-cycle, direct injection
Bore (mm):140
Bore (in):5.51
Stroke (in):6.5
Stroke (mm):165
Piston displacement (L):30.48
Piston displacement (in^3):1,860
Engine Rated (rpm):1,800
Fan drive method for radiator cooling:Hydraulic
Horsepower
SAEJ1995 - Gross (HP):1,065
SAEJ1995 - Gross (kW):794
ISO 9249 / SAE J1349 - Net (kW):780
ISO 9249 / SAE J1349 - Net (HP):1,046
HydrauMind Type:Open-center load sensing system, 3 selectable working modes
Main pump
Maximum flow for attachment, swing and travel (gpm):612
Maximum flow for fan drive (L/min):324
Gear Type:Variable capacity piston pumps
Main pumps for:Boom, arm, bucket, swing, and travel circuits
Pumps for:Boom, arm, bucket, swing, and travel circuits
Variable Type:Variable capacity piston pumps
Hydraulic cylinders
Maximum flow for fan drive (gpm):85.6
Maximum flow for attachment, swing and travel (L/min):2 317
Relief valve setting
Pilot circuit (psi):464
Pilot circuit (kgf/cm^2):33
Pilot circuit (MPa):3.2
Swing circuit (psi):4 270
Travel circuit (psi):4 760
Swing circuit (kgf/cm^2):300
Swing circuit (MPa):29.4
Travel circuit (kgf/cm^2):335
Travel circuit (MPa):32.9
Backhoe (psi):4 270
Backhoe (kgf/cm^2):300
Backhoe (Mpa):29.4
Hydraulic cylinders
Boom (Number of cylinders – bore x stroke x rod diameter)(in):11.8 x 104.2
Boom (Number of cylinders – bore x stroke x rod diameter)(mm):300 x 2 647
Bucket (Number of cylinders – bore x stroke x rod diameter)(in):7.9 x 85.4
Bucket (Number of cylinders – bore x stroke x rod diameter)(mm):200 x 2 170
Arm (Number of cylinders – bore x stroke x rod diameter)(in):9.8 x 84.2
Arm (Number of cylinders – bore x stroke x rod diameter)(mm):250 x 2 138
Hydraulic motors
Swing:2 x axial piston motors with swing holding brake
Travel:2 x axial piston motors with parking brake
Maximum travel speed (kph):2.7
Maximum travel speed (mph):1.7
Aspiration:Turbocharged, aftercooled, cooled, EGR
Number of cylinders:12
Governor:All-speed, electronic
Swing circle lubrication:Grease-bathed
Swing gear:2 x Planetary gear
Swing holding brakes:Oil disc brakes
Swing speed (rpm):4.8
Fuel tank (L):3 400
Fuel tank (US gal):898.3
Radiator (L):240
Radiator (US gal):63.4
Engine (US gal):33.8
Engine (L):128
Travel gear, each side (US gal):22.5
Travel gear, each side (L):85
Swing drive (L):2 x 30
Swing drive (US gal):2 x 7.9
Hydraulic tank (L):1 300
Hydraulic tank (US gal):343.5
Power Take Off (US gal):10.6
Power Take Off (L):40
Gradeability:70%, 35°
Parking brake:Oil disc brakes
Number of shoes (each side):49
Number of track rollers (each side):8
Number of carrier rollers (each side):3
Track adjuster:Grease
MetricImperial (US)
Engine and related items
Air cleaner, double element dry
Automatic Engine warm-up system
Electric priming pump for fuel
Engine, Komatsu SAA12V140E-7turbocharged, U.S. EPA Tier 4 Finalcertified.
Fuel pre-filters with water separators
Two cooling fans with fan guard(Hydraulic drive, for radiator and oilcooler), reversible
Electrical system
Alternators, 24 V/2 x 90 A
Auto decelerator and auto idlingsystem
Auto idle shutdown (adjustable)
Batteries, 4 x 12 V/140 Ah
Battery isolator and starting motorisolator
Circuit breakers
Electrical Engine oil pan heater andcoolant heater
Horn interconnected with warning light
Ladder operating alarm
Lever lock auto-lock
Lighting switches instrument panel
Radio w/ auxiliary input (3.5 mm jack)
Rear working light
Secondary Engine stop switch (groundaccess)
Starting motors, 2 x 11 kW
Working lights, 4 boom, 4 Cab base, 3fuel tank top front, 1 left front and 1 leftunder Cab side catwalk, LED lampsystem (2 lamps)
Guards and covers
Dust resistant net for radiator and oilcooler
Pump/Engine room partition cover
Power module under cover
Travel motor guard
Drive system
Planetary travel gear with axial pistonmotor
Travel parking brake
Hydraulic system
4 variable displacement piston pumps(2 tandem pumps) for work equipment,travel and swing, 2 variable displacementpiston pumps (1 tandem pump)for fan drive
Control levers for work equipment andswing with PPC system
Control levers and pedals for travelwith PPC system
Drain-filters for pumps & motors
Electric open-center load sensingsystem
Four control valves (two integratedvalves) for work equipment, swing andtravel
Heavy lift mode
High-pressure in-line oil filters
Oil cooler
One axial piston motor per track fortravel with counterbalance valve
Optimized electrical valve control forsmooth and efficient compoundmovement
Shockless boom control
Two axial piston motors for swing withsingle stage relief valve
Two-mode pressure setting for boom
Operator's cab
Automatic air conditioners (Twin)
Built-in top guard conforming to OPGlevel 2 (ISO10262)
KomVision, all round monitoringsystem
Large damper mounted and pressurizedmining shovel Cab with largewindshield, lockable door, large twinwipers and washers, floor mats, cigarettelighter, ashtray, 12V power supplyx 2, and cup holders
Large high resolution LCD colormonitor
Lock lever
Rearview monitoring system
Seat belt indicator
Seat belt, 3"
Seat, heated, high back, fully adjustableair suspension with retractableseat belt
Sun shield
Trainer's seat
Other
Automatic swing holding brake
Beacon, 2 (Cab top, Engine hood)
Dual rearview mirrors
Emergency Engine stop switch andfuel cut-off lever
Fuel tank, 898.2 U.S. Gal
Fully-automatic greasing system with52.8 U.S. Gal
Fully hydraulic operated stairway andfull 45° access to Cab
General tool kit
Jump start receptacle
KOMTRAX Plus® (vehicle health monitoringsystem)
Light in machine Cab
Maintenance light
Manual grease gun for track adjuster
PM tune-up service connection
Rear reflectors
Satellite communication system forKOMTRAX Plus® (Iridium)
Service center system, full quickcharge system (grease, oils, fuel,coolant)
Slip-resistant plates
Step light with timer
Travel alarm
Wide catwalk and large handrail
Undercarriage
32" double grouser shoes
8 track rollers/3 carrier rollers (Each side)
Hydraulic Idler Cushion (HIC) with shock absorbing accumulator
Track guiding guard (Separate type)
Engine and related items
Air cleaner, double element dry
Automatic Engine warm-up system
Electric priming pump for fuel
Engine, Komatsu SAA12V140E-7turbocharged, U.S. EPA Tier 4 Finalcertified.
Fuel pre-filters with water separators
Two cooling fans with fan guard(Hydraulic drive, for radiator and oilcooler), reversible
Electrical system
Alternators, 24 V/2 x 90 A
Auto decelerator and auto idlingsystem
Auto idle shutdown (adjustable)
Batteries, 4 x 12 V/140 Ah
Battery isolator and starting motorisolator
Circuit breakers
Electrical Engine oil pan heater andcoolant heater
Horn interconnected with warning light
Ladder operating alarm
Lever lock auto-lock
Lighting switches instrument panel
Radio w/ auxiliary input (3.5 mm jack)
Rear working light
Secondary Engine stop switch (groundaccess)
Starting motors, 2 x 11 kW
Working lights, 4 boom, 4 Cab base, 3fuel tank top front, 1 left front and 1 leftunder Cab side catwalk, LED lampsystem (2 lamps)
Guards and covers
Dust resistant net for radiator and oilcooler
Pump/Engine room partition cover
Power module under cover
Travel motor guard
Drive system
Planetary travel gear with axial pistonmotor
Travel parking brake
Hydraulic system
4 variable displacement piston pumps(2 tandem pumps) for work equipment,travel and swing, 2 variable displacementpiston pumps (1 tandem pump)for fan drive
Control levers for work equipment andswing with PPC system
Control levers and pedals for travelwith PPC system
Drain-filters for pumps & motors
Electric open-center load sensingsystem
Four control valves (two integratedvalves) for work equipment, swing andtravel
Heavy lift mode
High-pressure in-line oil filters
Oil cooler
One axial piston motor per track fortravel with counterbalance valve
Optimized electrical valve control forsmooth and efficient compoundmovement
Shockless boom control
Two axial piston motors for swing withsingle stage relief valve
Two-mode pressure setting for boom
Operator's cab
Automatic air conditioners (Twin)
Built-in top guard conforming to OPGlevel 2 (ISO10262)
KomVision, all round monitoringsystem
Large damper mounted and pressurizedmining shovel Cab with largewindshield, lockable door, large twinwipers and washers, floor mats, cigarettelighter, ashtray, 12V power supplyx 2, and cup holders
Large high resolution LCD colormonitor
Lock lever
Rearview monitoring system
Seat belt indicator
Seat belt, 78 mm
Seat, heated, high back, fully adjustableair suspension with retractableseat belt
Sun shield
Trainer's seat
Other
Automatic swing holding brake
Beacon, 2 (Cab top, Engine hood)
Dual rearview mirrors
Emergency Engine stop switch andfuel cut-off lever
Fuel tank, 3400 L
Fully-automatic greasing system with200 L
Fully hydraulic operated stairway andfull 45° access to Cab
General tool kit
Jump start receptacle
KOMTRAX Plus® (vehicle health monitoringsystem)
Light in machine Cab
Maintenance light
Manual grease gun for track adjuster
PM tune-up service connection
Rear reflectors
Satellite communication system forKOMTRAX Plus® (Iridium)
Service center system, full quickcharge system (grease, oils, fuel,coolant)
Slip-resistant plates
Step light with timer
Travel alarm
Wide catwalk and large handrail
Undercarriage
810 mm double grouser shoes
8 track rollers/3 carrier rollers (Each side)
Hydraulic Idler Cushion (HIC) with shock absorbing accumulator
The Argus Payload Monitoring System weighs each bucket in real-time, which helps eliminate the need to stop and calculate payload before loading the truck. Immediate feedback promotes loading accuracy, while peer benchmarking works to reinforce best practices to improve operator performance.
The ProVision Machine Guidance System promotes increased operator efficiency and productivity through the use of high-precision global navigation satellite system (HP-GNSS) positioning. Capable of providing up to 1 cm accuracy, the ProVision System helps guide excavator operators to dig the right material, keep the designed bench grade, respect dig limits, and work within the machine’s prime operating specifications. The system also provides guidance to truck operators to help promote precise spotting at a loading unit.
The MineCare Maintenance Management System combines the benefits of real-time remote equipment health monitoring with cloud computing technology and advanced analytics capabilities. The MineCare System promotes the advanced detection of issues before they occur, thus helping to reduce unplanned maintenance events, promoting increased uptime and utilization and reduced maintenance costs and equipment degradation.
The DISPATCH Fleet Management System (FMS) helps mines achieve enhanced load and haul cycle efficiency and productivity through its proprietary optimization algorithm. The DISPATCH FMS provides mines with increased potential for end-to-end monitoring of production and auxiliary equipment, improved compliance with planning objectives, shorter hang/queue times and more.
Telematics data can drive results for business operations, but only when you can collect and analyze it efficiently. Get the insights that can benefit your bottom line.
Enhance visibility with KomVision, an all-around monitoring system that uses high-definition cameras to provide operators with a real-time bird’s eye-view of their machines’ immediate working area.