.svg){kind=icon}
.svg){kind=icon}
Excavators
PC360LCi-11
Large excavators
- Engine power (HP) 257
- Engine power (kW) 192
- Bucket capacity (m^3) 1.8
- Bucket capacity (yd^3) 2.35
- Operating weight (kg) 37440
- Operating weight (lbs) 82524
This intelligent Machine Control (iMC) variant, the 36 tonne PC360LCi-11 features our revolutionary and fully factory-integrated 3D GNSS machine control and guidance system. It frees up operators to focus on moving material efficiently, without worrying about over- or under-digging, giving up to a 60% improvement in work efficiency. And it’s powered by Komatsu’s latest technology engine, for improved efficiency, fuel consumption and ultra-low emissions. Of course, it comes standard with our Komtrax remote monitoring and location system, backed by our Australia-wide service and support network.
Resources
Features and benefits
Heavy-duty after treatment system
This new system combines a Diesel Particulate Filter (DPF) and Selective Catalytic Reduction (SCR). The SCR NOx reduction system injects the correct amount of Diesel Exhaust Fluid (DEF) at the proper rate, thereby decomposing NOx into non-toxic water vapour (H2O) and nitrogen gas (N2).
Control box
The monitor of the Komatsu intelligent Machine Control (control box) uses a large 30.7 cm screen for visibility and ease of use. The simple screen layout displays the necessary information in an easily understood fashion. Touch screen icon interface instead of multi-step menu simplifies operation.
Realistic 3D display
The machine and design surfaces are shown in realistic 3D. The angle and magnification of the views can be changed, which allows the operator to select the optimum view depending on the work conditions.
Specifications
- Full specs
- Drive method: Hydrostatic
- Swing reduction: Planetary gear
- Swing circle lubrication: Grease-bathed
- Service brake: Hydraulic lock
- Holding brake/Swing lock: Mechanical disc brake
- Swing speed (rpm): 9.5
- Driven by: Hydraulic motor
- HydrauMind Type: HydrauMind System
-
Hydraulic cylinders
- Arm (Number of cylinders – bore x stroke x rod diameter)(in): 5.91 x 64.37 x 4.33
- Arm (Number of cylinders – bore x stroke x rod diameter)(mm): 1-160 x 1825 x 110
-
Main pump
- Pumps for: Boom, arm, bucket, swing, and travel circuits
- Maximum flow (US gpm): 141.36
- Maximum flow (L/min): 535
-
Relief valve setting
- Travel: 2 x axial piston motor with parking brake
- Swing: 1 x axial piston motor with swing holding brake
- Implement circuits (psi): 5404.85
- Travel circuit (psi): 5405
- Implement circuits (MPa): 37.27
- Swing circuit (psi): 4054
- Implement circuits (kgf/cm^2): 380
- Swing circuit (kgf/cm^2): 285
- Swing circuit (MPa): 27.94
- Travel circuit (kgf/cm^2): 380
- Travel circuit (MPa): 37.3
- Coolant (US gal): 9.77
- Engine (US gal): 9.25
- Swing drive (L): 13.7
- Swing drive (US gal): 3.62
- Hydraulic tank (L): 188
- Hydraulic tank (US gal): 49.68
- DEF tank (US gal): 10.3
- Engine (L): 35
- DEF tank (L): 39
- Fuel tank (L): 605
- Coolant (L): 37
- Engine Model: Komatsu SAA6D114E-6
- Aspiration: Variable geometry turbocharged, aftercooled
- Piston displacement (L): 8.85
- Piston displacement (in^3): 540.05
- Fan drive method for radiator cooling: Mechanical
-
Horsepower
- SAEJ1995 - Gross (kW): 202
- SAEJ1995 - Gross (HP): 271
- ISO 9249 / SAE J1349 - Net (kW): 192
- ISO 9249 / SAE J1349 - Net (HP): 257
- Maximum drawbar pull (kgf): 29570
- Parking brake: Mechanical disc brake
- Gradeability: 70 %
- Center frame: X-frame
- Track frame: Box-section
- Track adjuster: Hydraulic
- Number of shoes (each side): 48
- Number of carrier rollers (each side): 2
- Number of track rollers (each side): 8
- Pilot circuit (kgf/cm^3): 33
- Bucket crowd force - ISO (kgf): 23200
- Swing radius (in): 135.6
- Boom size (m) and type: 6.5 heavy duty
- Maximum reach at ground level (mm): 10920
- Digging depth - maximum (mm): 7380
- Maximum reach at ground level (in): 429.9
- Arm size (m) and type: 3.2 heavy duty
- Arm crowd force - ISO (kgf): 17400
- Swing radius (mm): 3445
- Overall track width (in): 125.6
- Overall track width (mm): 3190
Support you can count on
Videos
Introducing intelligent Machine Control 2.0 for Komatsu excavators
Learn about the new auto functions including bucket angle hold control and auto tilt bucket control. Talk to our experts about how our new iMC 2.0 for excavators can deliver higher levels of productivity.
Learn how Komatsu's PC360LCi-11 excavator gets the job done and brings your operators up to speed
Go from mass excavation to finished grading with a powerful excavator that can handle large jobs while equally adept at small- and mid-sized projects. The PC360LCi-11 with iMC 2.0 includes the latest technology to designed to help you maximize long-term efficiency and productivity.
- Video
- Video
- Video