.svg){kind=icon}
Electric rope shovels
2800XPC
- Nominal payload (metric tons) 59
- Nominal payload (short tons) 65
- Dipper capacity (m^3) 26.8 - 33.6
- Dipper capacity (yd^3) 35 - 44
- Production (MTPH) 5 702 - 7 603
- Production (TPH) 6,285 - 8,381
Designed for productivity in tough environments
Engineered for outstanding digging power and faster cycle times, the 2800XPC electric mining shovel is intended to be the productive, reliable, low cost per tonne workhorse of your fleet. Featuring an AC electrical system designed to move materials quickly, the 2800XPC is built to give you years of dependable service even in tough environments.
- Low cost per tonne loading
- Designed to deliver high cutting forces
Resources
Features and benefits
Big machine systems in a compact package
You don’t need a huge capacity shovel to get state-of-the-art components. The P&H 2800XPC incorporates the advanced Centurion electrical control system and a rugged drive — powerful, productivity-focused systems featured in much larger machines.
Stability throughout the dig cycle
Built to handle hard materials with a focus on penetrating the bank, the P&H twin leg handle focuses energy and cutting force by preventing any energy-wasting twisting or rotating of the dipper.
Latest dipper technology
One of the hardest working pieces on your shovel, the 2800XPC features the latest in dipper technology and offers a low maintenance latching system, optimal toe penetration digging and the ability to pass match shovels with trucks.
Specifications
- Full specs
- Nominal dipper capacity* (yd^3): 35 - 44
- Nominal dipper capacity* (m^3): 26.8 - 33.6
- Rated suspended load (st): 135
- Rated suspended load (mt): 122.5
- Nominal payload dipper capacity note: *Payload and dipper capacity are dependent on many factors. Contact Komatsu Mining for an analysis of your specific application.
- Height of cut (ft): 54 ft. 6 in
- Height of cut (m): 16.6
- Radius of cut (ft): 79 ft. 3 in
- Radius of cut (m): 24.2
- Dumping height* door open (ft): 30
- Dumping height* door open (m): 9.1
- Floor level radius (m): 16.4
- Floor level radius (ft): 53 ft. 9 in
- Tail swing radius (m): 9.9
- Tail swing radius (ft): 32 ft. 6 in
- Operator eye level (m): 9.6
- Operator eye level (ft): 31 ft. 4 in
- Dumping height (footnote): *Height shown with bail-type dipper. Heights will be greater than bail-less or compact-bail dippers. Actual dumping height can be greater than door clearance height.
- Crowd: Powerband V-belt drive between motor and gear case absorbs shock loads. First and second reduction gearing in enclosed gear case for reliable splash lubrication, ease of maintenance, and extended component life. Twin-leg dipper handle with torsion box and rack and pinion drive has inherent stability in the bank for optimal digging. Spring-set air release disc brake.
- Swing: Two modular P&H planetary gear cases of proven design and a single piece forged swing gear transmit torque for fast cycle times. Spring-set air release disc brakes – one per motor. Splash lube filtration system.
- Supply voltage: 4,160 or 7,200 V 3 Phase, 60 Hz or 5,000, 6,000 or 6,600 3 Phase, 50 Hz
- Supply transformer: Minimum 2,750 kVA (5,000, 6,000 or 6,600 3 phase, 50 Hz supply voltage)
- Minimum short circuit VA available at shovel: 22 MVA (5,000, 6,000 or 6,600 3 phase, 50 Hz supply voltage)
- Supply voltage note: *Voltage per customer requirements
- Propel: Propel on demand provides rapid transfer to propel mode. Rapid transfers allow frequent positioning of the shovel to the bank resulting in faster cycle times and more efficient digging. Two rugged P&H planetary gear cases of proven design independently transmit torque to the drive sprockets, producing the tractive effort required for fast, efficient propel and positioning operations. Delta drive low tension sprocket drive system with heavy duty cast crawler shoes. Spring-set air release disc brakes – one per motor.
- Hoist for gearing: All gearing housed in single enclosed gear case with filtered and cooled oil fed to all bearings in addition to splash lubrication for reliable operation and ease of maintenance. Large 56 in diameter hoist drum for extended rope bending life. Ferrule becket system and dual electric tuggers are standard for efficient rope change. Spring-set air release disc brakes – one per motor.