Hybrid shovel

2650CX

Operating weight 817 889 kg 1,803,134 lbs.
Engine output 2 386 kW 3,200 HP
Bucket capacity 27.1 - 36 m³ 35.4 - 47.1 yd³

View all specs

Request a quote

Download brochure Download spec sheet Financing options

Overview
Specifications
Service and support
Technology
Gallery

Equipped for the surface. Designed for your bottom line.

Combining the cost benefits of electric rope shovels with the flexible digging and maneuverability benefits of hydraulic excavators. The 2650CX hybrid shovel delivers up to a 15 percent reduction in cost per ton compared to 550- to 700-ton hydraulic excavators.

Up to a 15% TCO advantage
Up to a 50% fuel reduction
Up to a 10% reduction in maintenance and repair costs

Features and benefits

SR hybrid drive

Engineered to save on fuel and maintenance costs, SR hybrid drive technology captures regenerative power that is naturally produced, and transfers energy back into the SR drives.

Rope shovel attachment with clamshell bucket

Extended reach and excellent height clearance for efficient loading of ultra-class haul trucks due to a fixed boom and handle attachment configuration. Hydraulically articulated clamshell bucket increases material selectivity for a flexible digging operation.

Twin diesel engines

For improved mobility, twin diesel engines eliminate the requirement for an electric trail cable.

Ergonomic cab design

The 2650CX was designed with the operator in mind, providing comfort and added protections inside and out. The cab is equipped with intuitive displays, comfortable seat and controls, and LED lighting for excellent interior and exterior visibility.

Serviceability enhancements

The 2650CX hybrid shovel is designed to make maintenance more accessible and efficient. Modular systems are pre-assembled. A retractable service station is integrated for fluid refills.

Payload system and truck compatibility

The P&H 2650CX pairs effectively with Komatsu mining trucks and can accommodate trucks ranging from 135 to 360 metric tons (150-400 st).

Specifications for 2650CX

Full specifications

Optional equipment

Close all Expand all

US system Metric

Machine overview

Operating weight	805 014 kg
Standard track pads	1 626 mm
Ground bearing pressure	29.6 N/cm²
Engine output	2 386 kW
Bucket capacity @ 1.9 t/m³	31.1 m³
Rated suspended load	127.5 mt

Operating weight	1,774,283 lbs.
Standard track pads	64 in
Ground bearing pressure	43 psi
Engine output	3,200 HP
Bucket capacity @ 1.9 t/m³	40.7 yd³
Rated suspended load	140.5 st

Operational ranges

Maximum reach at ground level	14.64 m
Maximum dig reach	17.84 m
Operator eye level	8.9 m
Maximum dump height	11.54 m
Height of cut	18.11 m

Maximum reach at ground level	48.02 ft.
Maximum dig reach	58.53 ft.
Operator eye level	29.1 ft.
Maximum dump height	27.86 ft.
Height of cut	59.42 ft.

Clamshell bucket

Nominal payload	59 mt
Standard HD bucket @ 1.9 t/m³ (2:1 heaped)	31.1 m³
Lip width	5 080 mm
Number of teeth	6
Weight without wear package	67 719 kg
Weight with wear package	70 105 kg
Overburden bucket	36 m³
Iron ore bucket	27.1 m³

Nominal payload	65 st
Standard HD bucket @ 1.9 t/m³ (2:1 heaped)	40.7 yd³
Lip width	200 in
Number of teeth	6
Weight without wear package	149,294 lbs.
Weight with wear package	154,554 lbs.
Overburden bucket	47.1 yd³
Iron ore bucket	35.4 yd³

Extreme cold weather packages

An extreme cold weather package, accommodating outside temperatures down to -55° C, is available.

Extreme warm weather packages

An extreme warm weather package, accommodating outside temperatures up to 55+° C, is available.

Track Shield collision detection and mitigation system

Developed with extensive operator input, Track Shield is the only automated operator-assist technology that detects and helps prevent a bucket from striking the crawler.

Extreme cold weather packages

An extreme cold weather package, accommodating outside temperatures down to -55° C, is available.

Extreme warm weather packages

An extreme warm weather package, accommodating outside temperatures up to 55+° C, is available.

Track Shield collision detection and mitigation system

Developed with extensive operator input, Track Shield is the only automated operator-assist technology that detects and helps prevent a bucket from striking the crawler.

Support you can count on

Technology that works as hard as you do

ProVision

DISPATCH

MineCare

PreVail Remote Health Monitoring

LINCS II

SR Hybrid Drive System

The ProVision Machine Guidance System promotes increased operator efficiency and productivity through the use of high-precision global navigation satellite system (HP-GNSS) positioning. Capable of providing up to 1 cm accuracy, the ProVision System helps guide shovel operators to dig the right material, keep the designed bench grade, respect dig limits, and work within the machine’s prime operating specifications. The system also provides guidance to truck operators to help promote precise spotting at a loading unit.

Learn more

Komatsu PC7000 excavator loading Komatsu mining truck

The DISPATCH Fleet Management System (FMS) helps mines achieve enhanced load and haul cycle efficiency and productivity through its proprietary optimization algorithm. The DISPATCH FMS provides mines with increased potential for end-to-end monitoring of production and auxiliary equipment, improved compliance with planning objectives, shorter hang/queue times and more.

Learn more

The MineCare Maintenance Management System combines the benefits of real-time remote equipment health monitoring with cloud computing technology and advanced analytics capabilities. The MineCare System promotes the advanced detection of issues before they occur, thus helping to reduce unplanned maintenance events, promoting increased uptime and utilization and reduced maintenance costs and equipment degradation.

Learn more

Komatsu employee with Prevail data on computer screens

PreVail remote health management (RHM) technology provides your operations and maintenance teams with timely, efficient machine health and performance knowledge.

Learn more

LINCS II monitoring system in P&H mining equipment

Help your operators meet the challenges of demanding surface mining applications with the Komatsu LINCS II control and monitoring system. A user-friendly graphical format puts real-time feedback and vital machine statistics front and center, for more accurate and effective loading.

WE1350 wheel loader with two men in front

The SR (Switched Reluctance) hybrid drive system captures and uses regenerated energy, helping to reduce a machine’s overall fuel consumption and wear and tear on mechanical parts.

Learn more

Gallery

Images

Videos

Product spotlight: P&H 2650CX Hybrid Shovel

Combining the cost benefits of electric rope shovels with the flexible digging and maneuverability benefits of hydraulic excavators. The 2650CX hybrid shovel delivers up to a 15% reduction in cost per ton compared to 550- to 700-ton hydraulic excavators.
See our video on the technology featured on the 2650CX hybrid shovel

The P&H 2650CX hybrid shovel is designed to deliver up to a 15% reduction in cost per ton when compared to large diesel hydraulic excavators - through a combination of reduced fuel consumption, improved availability, and decreased maintenance and repair costs.
Bucket Boom Force See Komatsu's hybrid shovel offering

Strong digging forces and ranges for loading ultra-class haul trucks, diesel-powered with hydraulic attachment, and power regeneration for up to 50% reduction in fuel consumption.