7LS1D | 1.5 - 3.9 m |
7LS2B | 1.6 - 3.8 m |
7LS5B | 2 - 4.5 m |
7LS1D | 4.5 - 9.8 ft |
7LS2B | 5.25 - 12.5 ft |
7LS5B | 6.6 - 14.8 ft |
7LS1D | 1.0 - 1.3 m |
7LS2B | 1.1 - 1.5 m |
7LS5B | 1.4 m - 2.1 m |
7LS1D | 3.3 - 4.3 ft |
7LS2B | 3.75 - 4.8 ft |
7LS5B | 4.6 - 6.75 ft |
7LS1D | 52 tonnes |
7LS2B | 65 tonnes |
7LS5B | 82 tonnes |
7LS1D | 57.5 tons |
7LS2B | 72 tons |
7LS5B | 90.5 tons |
7LS2B | 521 - 588 mm (angled top) |
7LS5B | 600 mm |
7LS2B | 20.5 - 23 in |
7LS5B | 23.6 in |
7LS1D | 800 kN |
7LS2B | 800 kN |
7LS5B | 1 000 kN |
7LS1D | 90 tons |
7LS2B | 90 tons |
7LS5B | 112.5 tons |
7LS2B | 30 m/min |
7LS5B | 30 m/min |
7LS2B | 98 ft./min |
7LS5B | 98 ft./min |
7LS1D | 2 @ 11 kW |
7LS2B | 2 @ 21 kW |
7LS5B | 2 @ 21 kW |
7LS1D | 2 @ 15 HP |
7LS2B | 2 @ 28 HP |
7LS5B | 2 @ 28 HP |
7LS1D | 2 @ 65 kW |
7LS2B | 2 @ 110 kW |
7LS5B | 2 @ 110, 150 kW |
7LS1D | 2 @ 87 HP |
7LS2B | 2 @ 148 HP |
7LS5B | 2 @ 148 HP |
7LS2B | 120 kW |
7LS5B | 120 kW, 190 kW |
7LS2B | 1 @ 161 HP |
7LS5B | 1 @ 161 HP |
7LS1D | 2 @ 600 kW |
7LS1D | 2 @ 804 HP |
7LS2B |
Available Ranging Arms / Cutter kW (US 60 Hz) |
J525H / 675 kW ; J750A / 750 kW |
7LS2B |
Available Ranging Arms / Cutter kW (50 Hz) |
J525F / 610 kW ; J750A / 750, 860 kW |
7LS5B | Available Ranging Arms / Cutter kW (US 60 Hz) | J525H / 675 kW ; J750A / 750 kW |
7LS5B | Available Ranging Arms / Cutter kW (50 Hz) | J525F / 610 kW ; J750A / 750, 860 kW |
7LS2B |
Ranging Arm Model / Cutter Power (HP) |
J525H /905, J750/1006 |
7LS5B | Ranging Arm Model / Cutter Power (HP) | J525H /905, J750/1006 |
Smart Solutions
We help solve our customers’ toughest challenges using data-driven intelligence, collaboration and service execution. Our goal is to help reduce costs and increase productivity to help our customers achieve their operating and financial goals.
If you’re intent on increasing your productivity and reducing operator exposure to dust and noise, our latest shearer steering technology gives you access to fully automated cutting sequences, including gate end turnarounds. You program an initial cutting profile and extraction height with a graphical offline planner, and the shearer automatically replicates the profile until conditions change. Your operator has the ability to override control of the roof drum to follow the preferred horizon, and this new profile can be used in the remainder of the cutting sequence automatically. This advanced level of automation enables you to pursue the most efficient cycle times with added consistency.